Wet Type concrete shotcrete machine is a special method that allows concrete to be applied by spraying together with high-pressure air and water. This method offers many advantages over traditional concrete casting methods and is widely used in the construction industry.
Ingredients
The working principle of Wet Type concrete shotcrete machine
Advantages of Wet Type concrete shotcrete machine
Areas of use of Wet Type concrete shotcrete machine
Frequently asked questions
The working principle of Wet Type Concrete Shotcrete Machine Concrete Preparation:
A homogeneous concrete mortar is prepared by mixing water, cement and aggregates.
Spraying Process: The prepared concrete mortar is transported to the spray gun with the help of a high-pressure pump. At the same time, water is also added to the spray gun.
Hardening: The sprayed concrete mortar hardens to form a solid and durable concrete coating.
Advantages of Wet Type Concrete Shotcrete Machine
Fast and easy application: It can be applied much faster and easier compared to traditional concrete casting methods.
Homogeneous coating: A homogeneous and smooth coating is obtained by spraying method.
Less material waste: Material waste is minimized by spraying method.
Safer working environment: As with manual application, dust and dirt formation are reduced.
Application to complex geometries: It can be easily applied to surfaces with complex geometry.
Higher strength: Higher strength concrete coatings can be obtained by wet concrete spraying method.
Better adhesion: With the wet concrete spraying method, the concrete adheres better to the underlying surface.
Areas of use of Wet Type Concrete Shotcrete Machine
Tunnels: It is used for coating and strengthening of tunnel walls.
Mine Galleries: It is used for coating and strengthening the walls of mine galleries.
Pools: It is used in the interior and exterior coatings of pools.
Dams: It is used in the internal and external coatings of dams.
Buildings: It is used in the foundations of buildings, basements and behind curtains.
Stabilization of rocky slopes: It is used to prevent the collapse of rocky slopes.
Water tanks: It is used in the interior and exterior coatings of water tanks.
Sea walls: It is used in the construction of sea walls.
Frequently asked questions
- What is the difference from dry concrete spraying?
In dry concrete spraying, water is added after concrete spraying, while in wet concrete spraying, water and concrete are sprayed together.
- What equipment is required for wet concrete spraying?
Concrete mixer, pump, spray gun, compressor and other auxiliary equipment are required for Wet Type concrete shotcrete machine.
- How is wet concrete spraying done?
Wet Type concrete shotcrete machine should be carried out by an experienced team. It is important to have information about the use of the machine and safety measures.