Lps-1313 Segment Seal Adhesive produced by Lasparsan company is specially manufactured with its high adhesion strength and hard weather resistant structure. The field also saves time with its ease of application and is also very effective with its solvent-based structure. Produced by dispersion method under pressure and heat together with synthetic rubber, resin, inorganic additives, aliphatic solvents, providing strong adhesion between elastomeric structure and concrete, it is produced Decently and in accordance with the employer's technical specifications.  The application temperature was determined in the December of 5°C to 40°C. The Decanting time at ambient temperature is between 10-15 minutes. The complete drying time is determined as 24 hours at ambient temperature. The segment seal adhesive should be stored protected from temperatures below 0°C to 50°C. The product does not freeze at a minus degree, only its viscosity increases. In this case, the desired consistency can be obtained by keeping it at room temperature. It should not be confused with the purpose of homogenizing the product during the waiting process. Overflowing, infected surpluses can be wiped off with solvent. The shelf life is 12 months in dry and cool environment. It is protected from strong heat and sunlight. Do not drip on the skin or eyes, it may cause serious damage if it comes into contact with the eyes. Personal protective equipment is used during the application process.